Gardner Denver PAH 8″ Stroke Triplex Plunger Pump Parts List Manual
| Gardner Denver PAH 8″ Stroke Triplex Plunger Pump Parts List | ||
| FRAME | ||
| Qty. | Description | Part No. |
| 1 | FRAME, Incl, Ref. No.1 thru 5 | 200PAH001 |
| 4 | STUD, Main Shaft Saddle | 79L175 |
| 4 | NUT, Main Shaft Saddle | 50T3 |
| 4 | SHIM, Main Shaft Saddle | 77A322 |
| 1 | PLUG-CSK, PIPE, Oil Drain | 64B6 |
| 3 | PLUG MAGNETIC, Oil Drain | 66D13 |
| 2 | SADDLE | 2PA176 |
| 1 | SCREW-SqHd, Main Shaft Locating | 75P94 |
| 2 | PLATE-INSPECTION, Crosshead | PE723 |
| 12 | SCREW, Crosshead Inspection Plate | 75A136 |
| 2 | GASKET, Crosshead Inspection Plate | 25C1941 |
| 1 | PLATE-INSPECTION | PJ237 |
| 8 | SCREW, Inspection Plate | 75AA1 |
| 1 | GASKET, Inspection Plate | 1PJ715 |
| 1 | GAUGE-TEMPERATURE | 27H11 |
| 1 | BUSHING-PIPE, Temperature Gauge | 64E2 |
| 1 | GAUGE-OIL LEVEL | 40L17 |
| 2 | PLUG-CSK PIPE, In Sides of Frame | 64B3 |
| 1 | HOOD | 1PA246 |
| 20 | SCREW, Hood to Frame | 75AA1 |
| 1 | GASKET, Hood | PJ715 |
| 1 | BREATHER | 5C24 |
| 1 | COVER-FILLER | PJ880 |
| 2 | PLATE, Eccentric Shaft | PA247 |
| 2 | GASKET, Eccentric Shaft Plate | 25C1869 |
| 6 | SCREW, Eccentic Shaft Plate | 75A136 |
| 1 | PLATE-DATA | 2006124 |
| 1 | PLATE-NAME | PA454 |
| 8 | SCREW, Plate | 75K1 |
| ECCENTRIC GROUP | ||
| Qty. | Description | Part No. |
| 1 | ECCENTRIC, Incl. Ref. No. 12 | 200PAH255 |
| 1 | SHAFT-ECCENTRIC (with Plugs) | 1PA367A |
| 2 | PLUG, Shaft Oil Line | 64AC4 |
| 2 | BEARING | 12GC2 |
| 1 | GEAR-DRIVEN (Right Side) | 2PA1293 |
| 1 | GEAR-DRIVEN (Left Side) | 2PA1294 |
| 10 | SCREW, Gear to Eccentric | 75B43 |
| 2 | SCREW, Gear Locating | 75B88 |
| 24″ | WIRE | 97A29 |
| 12 | SCREW, Plate to Eccentric | 75B20 |
| 2 | OIL SEAL, Incl. next item | 1PA1062A |
| 2 | SEAL-QUAD RING | 25AJ58 |
| 2 | PLATE-BEARING RETAINER | 2PA366 |
| 72″ | WIRE, Plate to Eccentric Shaft | 97A29 |
| LUBRICATING OIL PUMP PIPING, HEAT EXCHANGER & FILTER | ||
| Qty. | Description | Part No. |
| 1 | OIL PUMP | 201PAH188 |
| 4 | SCREW, Oil pump to Frame | 75A98 |
| 1 | BUSHING-HUB | 22F12SD |
| 1 | GEAR-DRIVEN, Oil Pump | 2013902 |
| 1 | KEY-OIL PUMP | 35D2 |
| Suction Screen to Oil Pump | ||
| 1 | SCREEN-OIL | 3WAJ511 |
| 1 | ELBOW-PIPE | 64V8 |
| 1 | NIPPLE-PIPE | 63K16 |
| 1 | ELBOW-PIPE STREET | 64U4 |
| Oil Pump to Oil Filter | ||
| 1 | BUSHING-PIPE | 64E16 |
| 1 | ADAPTOR-HOSE, Swivel | 29Q17 |
| 1 | ASM HYDRAULIC HOSE | 2009009 |
| 1 | TEE-PIPE | 64G7 |
| 1 | NIPPLE-PIPE | 63U12X13 |
| 1 | VALVE-LIQUID RELIEF | 90AR27 |
| 1 | UNION-STRAIGHT | 64Z10 |
| 2 | NIPPLE-PIPE | 63U12X44 |
| 1 | FILTER-OIL | 26C18 |
| Filter to Frame Adaptor | ||
| 1 | ADAPTOR-HOSE, Swivel | 29Q17 |
| 1 | ASM HYDRAULIC HOSE | 29R23 |
| 1 | ELBOW-PIPE | 64V5 |
| 1 | NIPPLE-PIPE | 63U12X40 |
| 2 | BUSHING-PIPE | 64R3 |
| 1 | CONNECTOR, Frame | 76AUX113 |
| Frame Adaptor to Heat Exchanger | ||
| 1 | BUSHING-PIPE | 64R3 |
| 1 | ELBOW-PIPE STREET | 64D6 |
| 1 | ASM HYDRAULIC HOSE | 29R106 |
| 1 | ADAPTOR-HOSE, Swivel | 29Q17 |
| 1 | BUSHING-PIPE | 64E9 |
| 1 | HEAT EXCHANGER, Incl. next 6 items | 2013457 |
| 2 | ANODE-ZINC | 2008266 |
| 1 | BONNET-RETURN | 2010323 |
| 1 | GASKET-RETURN | 2008272 |
| 1 | ASM CORE | 2010324 |
| 1 | GASKET, 2-PASS | 2010295 |
| 1 | BONNET, 2-PASS | 2010322 |
| Heat Exchanger to Gauge | ||
| 1 | BUSHING-PIPE | 64E9 |
| 1 | NIPPLE-PIPE | 63U12X13 |
| 1 | ELBOW-PIPE | 64C5 |
| 1 | ASM HYDRAULIC HOSE | 29N1 |
| 1 | ADAPTOR-HOSE, Swivel | 29Q17 |
| 1 | TEE-PIPE | 64P14 |
| 1 | GAUGE-PRESSURE | 27A121 |
| 1 | NIPPLE-PIPE | 63U12X20 |
| Heat Exchanger to Water Control Valve | ||
| 1 | BUSHING-PIPE | 6429 |
| 1 | NIPPLE-PIPE | 63F21 |
| 1 | ELBOW-PIPE | 64C4 |
| 1 | NIPPLE-PIPE, Half | 63AJ8X40 |
| 15″ | HOSE-OIL | R14G |
| 2 | CLAMP-HOSE | 29B31 |
| 1 | NIPPLE-PIPE, Half | 63AJ8X40 |
| 1 | UNION-STRAIGHT | 64Z3 |
| 2 | NIPPLE-PIPE | 63F21 |
| 1 | ELBOW-PIPE | 64C4 |
| 2 | BUSHING-PIPE | 64E14 |
| 1 | VALVE-THERMAL | 90K165 |
| OIL CIRCULATING PUMP | ||
| Qty. | Description | Part No. |
| 1 | OIL PUMP-COMPLETE | 201PAH188 |
| 1 | COVER | 2010987 |
| 1 | CARRIER-IDLER | 2010988 |
| 1 | PIN-IDLER | 2010989 |
| 1 | SRPING | 2010990 |
| 1 | ASM IDLER | 2010991 |
| 1 | WASHER | 2010992 |
| 1 | BEARING-BALL | 2010993 |
| 1 | SHIM, Bearing | 2010994 |
| 1 | GASKET, Cover | 2109006 |
| 1 | ROTOR | 2010995 |
| 1 | WASHER | 2010996 |
| 1 | SEAL, Mechanical | 2109003 |
| 1 | O-RING | 2109005 |
| 1 | PLUG-HOUSING | 2010997 |
| 1 | HOUSING-BEARING | 2109005 |
| 1 | SEAL, Bearing Housing | 2010998 |
| 1 | BEARING-ROLLER | 2010999 |
| 1 | VENT PLUG-SUCTION | 2109000 |
| 1 | VENT PLUG-DISCHARGE | 2109001 |
| 2 | WASHER, Vent Plug | 2109002 |
| OIL FILTER | ||
| Qty. | Description | Part No. |
| 1 | ASM OIL FILTER, Incl. Ref. No. 1 thru 4 | 26C18 |
| 1 | ASM ELEMENT, Incl. Ref. No.3 | 2109769 |
| 1 | COVER | 2109770 |
| 1 | GASKET | 2109771 |
| 4 | SCREW, COVER | 75A54 |
| 1 | GASKET, Filter to Frame | 25C1788 |
| 6 | SCREW-SoHd CAP, Filter to Frame | 75P95 |
| CONNECTING ROD | ||
| Qty. | Description | Part No. |
| 3 | ASM CONNECTING ROD COMPLETE Incl. Ref. No. 1 thru 10 | 2014809 |
| 6 | BOLT, Connecting Rod | 200PAH254 |
| 6 | NUT, Connecting Rod Bolt | 50AQ30 |
| 6 | NUT-LOCK, Connecting Rod Bolg | 50M2 |
| 3 | BUSHING | 1PA421 |
| 24 | CLAMP, Liner | PA889 |
| 72″ | WIRE-SCREW | 97A29 |
| 24 | SCREW, Clamp | 75B41 |
| 3 | BUSHING, Crosshead Pin | 200PAH229 |
| 12 | SHIM (.003) | 77A324 |
| JACKSHAFT & BEARING GROUP | ||
| Qty. | Description | Part No. |
| 1 | JACKSHAFT | 4PA371 |
| 1 | KEY, Jackshaft | 35B199 |
| 2 | BEARING | 12GC3 |
| 12 | SCREW, Bearing Housing | 75AA1 |
| 2 | HOUSING-BEARING | 1PA368 |
| 2 | GASKET, Bearing Housing | 25C1945 |
| 2 | PLATE-RETAINER (Inner), Bearing | 1PA1206 |
| 6 | SCREW, Bearing Retainer Plate | 75B13 |
| 48″ | WIRE | 97A29 |
| 1 | ADAPTOR (Jackshaft) | 2006524 |
| 2 | SCREW, Hex Cap (Adaptor to Jackshaft) | 75P73 |
| 1 | SLEEVE-WEAR, Oil Seal | 80L8 |
| 1 | SEAL-OIL | 60G259 |
| 1 | PLATE-BEARING RETAINER | PJ370 |
| 12 | SCREW, Bearing Retainer Plate | 75AA1 |
| 1 | GASKET, Bearing Retainer Plate | 25C1722 |
| 2 | SHIM (.002), Bearing Retainer Plate | 77A366 |
| 3 | SHIM (.005), Bearing Retainer Plate | 77A320 |
| 4 | SHIM (.010), Bearing Retainer Plate | 77A321 |
| 1 | COVER, Jackshaft Extension | 200PAH490 |
| CROSSHEAD, EXTENSION ROD & OIL STOP HEAD GROUP | ||
| Qty. | Description | Part No. |
| 3 | CROSSHEAD | PJ175 |
| 3 | ROD-EXTENSION | 1PO183 |
| 18 | SCREW, Extension Rod to Crosshead | PO701 |
| 72″ | WIRE | 97A29 |
| 3 | PIN-CROSSHEAD | 200PAH189 |
| 6 | RING-RETAINING | 65U25 |
| 3 | HEAD-OIL STOP | PJ226 |
| 6 | PLATE-RETAINING | 200PJH168 |
| 12 | SCREW, Head to Frame | 75A208 |
| 12 | GASKET, Head to Frame Screw | 25F9 |
| 3 | GASKET, Oil Stop Head | 25C1870 |
| 6 | SEAL, Oil Stop Head | 2011872 |
| 6 | Ring-RETAINING, Oil Seal | 1PV1398 |
| 18 | SCREW, Oil Seal Retaining Ring | 75A102 |
| 3 | BAFFLE, Extension Rod | 5FXK840 |
| 3 | ASM PLUNGER COUPLING, Incl. Ref. No. 18 | 2012240 |
| 6 | SCREW, Coupling | 75A208C |
| FLUID CYLINDER (HP Block Steel) (Well Servicing or Drilling) | ||
| Qty. | Description | Part No. |
| 3 | FLUID CYLINDER, Incl. Ref. No. 2,3,5 &23 | 200PJH029B |
| 18 | STUD, Cylinder to Frame | 79AJ2 |
| 36 | NUT, Cylinder to Frame & Liner Clamp | 50B35 |
| 12 | STUD, Discharge Manifold | 79L142 |
| 6 | LOCK-COVER | 3PA587 |
| 6 | COVER-VALVE | 200PJH147 |
| 6 | GASKET, Valve Cover | 200PJH715 |
| 6 | BUSHING, Discharge Valve Cover | 2013547 |
| 3 | RETAINER, Suction Valve Guide | 200PJH205 |
| 3 | GUIDE-VALVE, Suction | 200PJH483 |
| 1 | MANIFOLD-SUCTION | 200PAH069 |
| 1 | PLUG-SqHd PIPE | 64A25 |
| 12 | SCREW, Suction Manifold to Cylinder | 75A57N |
| 3 | GASKET, Suction Manifold to Cylinder | 25G18 |
| 1 | FLANGE-WELD | 64CU10 |
| 1 | FLANGE-BLIND | 64EB16 |
| 16 | SCREW, Flange | 75A214 |
| 16 | NUT, Flange | 50B8 |
| 2 | GASKET, Flange to Manifold | 25C2622 |
| 1 | MANIFOLD-DISCHARGE | 200PJH071 |
| 3 | GASKET, Manifold to Cylinder | 25AL54 |
| 12 | NUT, Manifold to Cylinder Stud | 50B9 |
| 2 | FLANGE, Discharge | 64EB37 |
| 2 | GASKET, Discharge Flange | 25BC42 |
| 16 | SCREW, Discharge Flange | 75A231 |
| 16 | NUT, Discharge Flange | 50B9 |
| 1 | PIN, (Valve cover tightening bar) | 62L62 |
| 1 | PIN, (Valve cover tightening bar) | 2009526 |
| STEEL-CENTER GUIDED VALVE WITH URETHANE INSERT (Standard Equipment) | ||
| Qty. | Description | Part No. |
| 6 | ASM FLUID VALVE, Incl. Ref. No. 1 thru 4 | PJ482A |
| 6 | VALVE-FLUID | PJ482 |
| 6 | LOCKNUT | 50V51 |
| 6 | WASHER-VALVE | PJ279 |
| 6 | INSERT-URETHANE | PJ452 |
| 6 | SEAT-VALVE | PJ451 |
| 6 | SPRING | 78H23 |
| STEEL-CENTER GUIDED VALVE WITH RUBBER INSERT (Optional) | ||
| Qty. | Description | Part No. |
| 6 | ASM FLUID VALVE, Incl. Ref. No. 1 thru 4 | 2005341 |
| 6 | VALVE-FLUID | PJ482 |
| 6 | LOCKNUT | 50V51 |
| 6 | WASHER-VALVE | PJ279 |
| 6 | INSERT-RUBBER | 2005342 |
| 6 | SEAT-VALVE | PJ451 |
| 6 | SPRING | 78H23 |
| STUFFING BOX & PLUNGERS Model PAHB_B | ||
| Qty. | Description | Part No. |
| 3 | GLAND (4-1/2″) | 6PA113 |
| 3 | BOX-STUFFING, Incl. Ref. No. 3 (4-1/2″) | 8PA14 |
| 3 | FITTING-GREASE (4-1/2″) | 40E7 |
| 3 | GASKET (4-1/2″) | 25AL22 |
| 3 | PIN-GLAND (4-1/2″) | 62V22 |
| 3 | PLUNGER (Colmonoy) (4-1/2″) | 200PAH038 |
| 3 | GLAND (4″) | 6PA113 |
| 3 | BOX-STUFFING, Incl. Ref. No. 3 (4″) | 9PA14 |
| 3 | FITTING-GREASE (4″) | 40E7 |
| 3 | GASKET (4″) | 25AL22 |
| 3 | PIN-GLAND (4″) | 62V22 |
| 3 | PLUNGER (Colmonoy) (4″) | 201PAH038 |
| PACKING – “S” STYLE Model PAHB_B | ||
| Qty. | Description | Part No. |
| 3 | PACKING GROUP, Incl. Ref. No. 6 thru 10 (4-1/2″) | TGF77612 |
| 3 | RING-JUNK (4-1/2″) | 201TGF317 |
| 3 | PACKING SET, Incl. Ref. No. 9* (4-1/2″) | 60DD117 |
| 3 | SPACER-LANTERN (4-1/2″) | 201TGF445 |
| 3 | O-RING (4-1/2″) | 25AA32 |
| 3 | BUSHING-GLAND (4-1/2″) | 202TGF152 |
| 3 | PACKING GROUP, Incl. Ref. No. 6 thru 10 (4″) | TGF77613 |
| 3 | RING-JUNK (4″) | 202TGF317 |
| 3 | PACKING SET, Incl. Ref. No. 9* (4″) | 60DD116 |
| 3 | SPACER-LANTERN (4″) | 202TGF445 |
| 3 | O-RING (4″) | 25AA28 |
| 3 | BUSHING-GLAND (4″) | 203TGF152 |
| STUFFING BOX & PLUNGERS Model PAHD_B | ||
| Qty. | Description | Part No. |
| 3 | GLAND (4-1/2″) | 6PA113 |
| 3 | BOX-STUFFING, Incl. Ref. No. 3 (4-1/2″) | 8PA14 |
| 3 | FITTING-GREASE (4-1/2″) | 40E7 |
| 3 | GASKET (4-1/2″) | 25AL22 |
| 3 | PINS-GLAND (4-1/2″) | 62V22 |
| 3 | PLUNGER (Colmonoy) (4-1/2″) | 200PAH038 |
| 3 | GLAND (4″) | 6PA113 |
| 3 | BOX-STUFFING, Incl. Ref. No. 3 (4″) | 9PA14 |
| 3 | FITTING-GREASE (4″) | 40E7 |
| 3 | GASKET (4″) | 25AL22 |
| 3 | PIN-GLAND (4″) | 62V22 |
| 3 | PLUNGER (Colmonoy) (4″) | 201PAH038 |
| 3 | GLAND (3-1/2″) | 6PA113 |
| 3 | BOX-STUFFING, Incl. Ref. No. 3 (3-1/2″) | 10PA14 |
| 3 | FITTING-GREASE (3-1/2″) | 40E7 |
| 3 | GASKET (3-1/2″) | 25AL22 |
| 3 | PINS-GLAND (3-1/2″) | 62V22 |
| 3 | PLUNGER (Colmonoy) (3-1/2″) | 203PAH038 |
| PACKING – “J” STYLE Model PAHD_B | ||
| Qty. | Description | Part No. |
| 3 | ASM PACKING, Incl. Ref. No. 6 thru 10 (4-1/2″) | 38PA160045 |
| 3 | RING-JUNK (4-1/2″) | PO31745 |
| 3 | PACKING SET, Inc. Ref. No.9 (4-1/2″) | 60BU93 |
| 3 | SPACER-LANTERN (4-1/2″) | PO44545 |
| 3 | O-RING (4-1/2″) | 25AA32 |
| 3 | BUSHING-GLAND (4-1/2″) | 29PA15245 |
| 3 | ASM PACKING, Incl. Ref. No. 6 thru 10 (4″) | 38PA160040 |
| 3 | RING-JUNK (4″) | PO31740 |
| 3 | PACKING SET, Inc. Ref. No.9 (4″) | 60BU91 |
| 3 | SPACER-LANTERN (4″) | PO44540 |
| 3 | O-RING (4″) | 25AA28 |
| 3 | BUSHING-GLAND (4″) | 29PA15240 |
| 3 | ASM PACKING, Incl. Ref. No. 6 thru 10 (3-1/2″) | 38PA160035 |
| 3 | RING-JUNK (3-1/2″) | PO31735 |
| 3 | PACKING SET, Inc. Ref. No.9 (3-1/2″) | 60BU90 |
| 3 | SPACER-LANTERN (3-1/2″) | PO44535 |
| 3 | O-RING (3-1/2″) | 25AA24 |
| 3 | BUSHING-GLAND (3-1/2″) | 29PA15235 |
| PISTON ROD, PISTON & LINER Models PAHA_B & PAHC_B | ||
| Qty. | Description | Part No. |
| 3 | CLAMP-LINER (5″) | 1PA217 |
| 3 | GASKET, Liner to Cylinder (5″) | 25AL22 |
| 3 | PISTON ROD, Incl. Ref. No. 4 (5″) | PJ183 |
| 3 | NUT, Piston Rod (5″) | 50V14 |
| 3 | ASM. PISTON BODY, Incl. Ref. No. 6, 7 & 8 (5″) | 241TBB045A |
| 3 | O-RING (5″) | 25AH1 |
| 3 | SPACER (5″) | None |
| 3 | INSERT GROUP, Incl. Ref. No. 9 & 10 (5″) | TBB76024 |
| 3 | PLATE-RETAINER (5″) | * |
| 3 | RING-RETAINING (5″) | * |
| 3 | LINER (5″) | PJ13950 |
| 3 | BAFFLE (5″) | PJ840 |
| 12 | NUT-JAM, Baffle (5″) | 50F11 |
| 3 | CLAMP-LINER (4-1/2″) | 1PA217 |
| 3 | GASKET, Liner to Cylinder (4-1/2″) | 25AL22 |
| 3 | PISTON ROD, Incl. Ref. No. 4 (4-1/2″) | PJ183 |
| 3 | NUT, Piston Rod (4-1/2″) | 50V14 |
| 3 | ASM. PISTON BODY, Incl. Ref. No. 6, 7 & 8 (4-1/2″) | 239TBB045A |
| 3 | O-RING (4-1/2″) | 25AH1 |
| 3 | SPACER (4-1/2″) | None |
| 3 | INSERT GROUP, Incl. Ref. No. 9 & 10 (4-1/2″) | TBB76022 |
| 3 | PLATE-RETAINER (4-1/2″) | * |
| 3 | RING-RETAINING (4-1/2″) | * |
| 3 | LINER (4-1/2″) | PJ13945 |
| 3 | BAFFLE (4-1/2″) | PJ840 |
| 12 | NUT-JAM, Baffle (4-1/2″) | 50F11 |
| 3 | CLAMP-LINER (4″) | 1PA217 |
| 3 | GASKET, Liner to Cylinder (4″) | 25AL22 |
| 3 | PISTON ROD, Incl. Ref. No. 4 (4″) | PJ183 |
| 3 | NUT, Piston Rod (4-1/2″) | 50V14 |
| 3 | ASM. PISTON BODY, Incl. Ref. No. 6, 7 & 8 (4″) | 241TBA045B |
| 3 | O-RING (4″) | 25AH1 |
| 3 | SPACER (4″) | 200TBA144 |
| 3 | INSERT GROUP, Incl. Ref. No. 9 & 10 (4″) | TBA76008 |
| 3 | PLATE-RETAINER (4″) | * |
| 3 | RING-RETAINING (4″) | * |
| 3 | LINER (4″) | PJ13940 |
| 3 | BAFFLE (4″) | PJ840 |
| 12 | NUT-JAM, Baffle (4″) | 50F11 |
| PISTON ROD, PISTON & LINER Model PAHC_B | ||
| Qty. | Description | Part No. |
| 3 | CLAMP-LINER (3-1/2″) | 1PA217 |
| 3 | GASKET, Liner to Cylinder (3-1/2″) | 25AL22 |
| 3 | PISTON ROD, Incl. Ref. No. 4 (3-1/2″) | PJ183 |
| 3 | NUT, Piston Rod (3-1/2″) | 50V14 |
| 3 | ASM. PISTON BODY, Incl. Ref. No. 6, 7 & 8 (3-1/2″) | 239TBA045B |
| 3 | O-RING (3-1/2″) | 25AH1 |
| 3 | SPACER (3-1/2″) | 200TBA144 |
| 3 | INSERT GROUP, Incl. Ref. No. 9 & 10 (3-1/2″) | TBA76006 |
| 3 | PLATE-RETAINER (3-1/2″) | * |
| 3 | RING-RETAINING (3-1/2″) | * |
| 3 | LINER (3-1/2″) | PJ13935 |
| 3 | BAFFLE (3-1/2″) | PJ840 |
| 12 | NUT-JAM, Baffle (3-1/2″) | 50F11 |
| 3 | CLAMP-LINER (3-1/4″) | 1PA217 |
| 3 | GASKET, Liner to Cylinder (3-1/4″) | 25AL22 |
| 3 | PISTON ROD, Incl. Ref. No. 4 (3-1/4″) | PJ183 |
| 3 | NUT, Piston Rod (3-1/4″) | 50V14 |
| 3 | ASM. PISTON BODY, Incl. Ref. No. 6, 7 & 8 (3-1/4″) | 238TBA045B |
| 3 | O-RING (3-1/4″) | 25AH1 |
| 3 | SPACER (3-1/4″) | 200TBA144 |
| 3 | INSERT GROUP, Incl. Ref. No. 9 & 10 (3-1/4″) | TBA76005 |
| 3 | PLATE-RETAINER (3-1/4″) | * |
| 3 | RING-RETAINING (3-1/4″) | * |
| 3 | LINER (3-1/4″) | PJ13932 |
| 3 | BAFFLE (3-1/4″) | PJ840 |
| 12 | NUT-JAM, Baffle (3-1/4″) | 50F11 |
| 3 | CLAMP-LINER (3″) | 1PA217 |
| 3 | GASKET, Liner to Cylinder (3″) | 25AL22 |
| 3 | PISTON ROD, Incl. Ref. No. 4 (3″) | PJ183 |
| 3 | NUT, Piston Rod (3″) | 50V14 |
| 3 | ASM. PISTON BODY, Incl. Ref. No. 6, 7 & 8 (3″) | 237TBA045B |
| 3 | O-RING (3″) | 25AH1 |
| 3 | SPACER (3″) | 200TBA144 |
| 3 | INSERT GROUP, Incl. Ref. No. 9 & 10 (3″) | TBA76004 |
| 3 | PLATE-RETAINER (3″) | * |
| 3 | RING-RETAINING (3″) | * |
| 3 | LINER (3″) | PJ13930 |
| 3 | BAFFLE (3″) | PJ840 |
| 12 | NUT-JAM, Baffle (3″) | 50F11 |
| CROSSHEAD LUBRICATION PIPING | ||
| Qty. | Description | Part No. |
| 1 | GAUGE-AIR PRESSURE, Oil | 27A121 |
| 1 | NIPPLE-PIPE | 63U12X20 |
| 1 | TEE-PIEP, Reducing | 64P14 |
| 1 | ADAPTOR-HOSE, Swivel | 29Q17 |
| 1 | ASM HYDRAULIC HOSE | 29R21 |
| 1 | TEE PIPE | 64G7 |
| 1 | NIPPLE-PIPE | 63G1 |
| 1 | BUSHING-PIPE | 64R3 |
| 1 | NIPPLE-PIPE | 63G1 |
| 1 | TEE-PIPE | 64G7 |
| 1 | BUSHING-PIPE | 64E95 |
| 1 | ADAPTOR-HOSE, Straight Swivel | 29Q6 |
| 1 | ASM HYDRAULIC HOSE | 29R43 |
| 2 | TEE-PIPE | 64G6 |
| 3 | BUSHING-PIPE | 64E43 |
| 3 | NIPPLE-PIPE | 63D3 |
| 4 | NIPPLE-PIPE | 63AJ9X32 |
| 2 | COUPLING-PIPE | 64BC2 |
| 1 | ELBOW-PIPE | 64C4 |
| LUBRICATOR GROUP (Optional Equipment) PAHB_B & PAHD_B | ||
| Qty. | Description | Part No. |
| 1 | LUBRICATOR GROUP, Includes the Following Items | PAH68241 |
| 1 | LUBRICATOR | 40G100 |
| 4 | SCREW-HEX CAP, Lubricator to Bracket | 75A33 |
| 4 | WASHER-PLAIN, Lubricator to Bracket | 95A2 |
| 1 | BRACKET-LUBRICATOR | 200PAH403 |
| 4 | SCREW-HEX CAP, Bracket to Pump | 75A12 |
| 4 | WASHER-PLAIN, Bracket to Pump | 95A5 |
| 1 | ASM SHEAVE, Jackshaft | 1PA1342A |
| 1 | SHEAVE, Lubricator | 73A626 |
| 1 | GUARD-AUXILIARY, Drive | 201PAH240 |
| 1 | BELT | 13N5301 |
| 1 | KEY-WOODRUFF, Lubricator | 35D2 |
| 3 | SCREW-HEX CAP, Guard to Pump | 75A20 |
| 3 | WASHER-PLAIN, Guard to Pump | 95A5 |
| 144″ | TUBE (Lubricator to Stuffing Box) | 85D4A |
| 3 | VALVE-CHECK (Asm. At Stuffing Box) | 90J111 |
| 3 | ELBOW-TUBE (Asm. At Stuffing Box and Lubricator) | 86A25 |
| PISTON LUBRICATING PUMP PAHA_B & PAHC_B | ||
| Qty. | Description | Part No. |
| ASM PUMP, Incl. all parts shown | CA122 | |
| 1 | CASING | C1K2A1 |
| 2 | PLUG-SqHd PIPE | 64AA6 |
| 1 | COCK, Drain | 90C31 |
| 1 | ASM IMPELLER, SHAFT & PIN | C1K1A1A |
| 1 | KEY | 35B4 |
| 1 | SEAL | 60BT11 |
| 1 | GASKET | 25D212 |
| 1 | FRAME | 200CAW001 |
| 8 | SCREW | 75A130 |
| 1 | BEARING-BALL (Inner), Incl. Retaining Ring | 12AK3 |
| 1 | BEARING-BALL (Outer), Incl. Retaining Ring | 12AK3 |
| PISTON LUBRICATING PUMP & PIPING PAHA_B & PAHC_B | ||
| Qty. | Description | Part No. |
| 1 | SHEAVE-AUXILIARY (Includes Set Screw) | 2006093 |
| 1 | BELT | 13C6 |
| 1 | SHEAVE, Driven | 73K1A30 |
| 1 | BUSHING, Sheave | 22E16B |
| 1 | PUMP-PISTON BURICATING | ** |
| 4 | SCREW, Pump to Skid | 75A1 |
| 4 | WASHER-LOCK | 95B3 |
| 4 | WASHER-PLAIN | 95A3 |
| Piping – Lube Tank to Pump | ||
| 1 | SCREEN-OIL | 2WAJ511 |
| 1 | NIPPLE-PIPE | 63H25 |
| 1 | ELBOW-PIPE | 64C6 |
| 1 | ADAPTOR-HOSE | 29Q9 |
| 1 | ASM HYDRAULIC HOSE | 29Z7 |
| Piping – Pump to Liner | ||
| 1 | ASM HYDRAULIC HOSE | 29R9 |
| 1 | ADAPTOR-HOSE | 29Q9 |
| 1 | VALVE | 90A36 |
| 1 | NIPPLE-PIPE | 63H25 |
| 1 | ELBOW-PIPE | 64S5 |
| 3 | NIPPLE-PIPE | 63G39 |
| 3 | TEE-PIPE | 64P39 |
| 1 | VALVE | 90A25 |
| 2 | NIPPLE | 63G2 |
| 1 | COUPLING-PIPE | 64AB3 |
| 2 | CLAMP | 98H4 |
| 2 | SCREW, Clamp | 75A32 |
| 3 | ASM HYDRAULIC HOSE | 29R32 |
| 3 | ADAPTOR-HOSE | 29Q7 |
| 3 | BUSHING-PIPE | 64E2 |
| 3 | BAFFLE | PJ840 |
| Piping – Frame to Lube Tank | ||
| 2 | NIPPLE-PIPE | 63AJ24X64 |
| 2 | HOSE | 29A305 |
| 4 | CLAMP-HOSE | 29B32 |
| 2 | NIPPLE-PIPE | 63AJ24X30 |
| 2 | ELBOW-PIPE | 64C8 |
| 2 | NIPPLE-PIPE | 63AJ24X30 |
| 2 | INSERT | 3FO452 |
| 1 | COVER-TANK | 2006628 |
| 2 | NUT-WING | 50H1 |
| 1 | TANK-LUBE OIL | 2006626 |
| 1 | PLUG-SqHd Pipe | 64A6 |
| 2 | PLUG-SqHd Pipe | 64A7 |
| 4 | SCREW, Tank to Skid | 75H4 |
| 1 | PLUG-SqHd PIPE | 64A9 |
| PLUNGER WASHING PARTS (Optional Equipment) (PAHB_B & PAHD_B) | ||
| Qty. | Description | Part No. |
| 1 | ASM SHEAVE-AUXILIARY, Incl. Ref. No. 2 | 1PA1342A |
| 2 | SET SCREW-SoHd, Drive | 76F19N |
| 1 | BELT, Pump Drive | 13N7101 |
| 1 | SHEAVE, Pump Drive | 73N13V45 |
| 1 | BUSHING-HUB, Sheave | 22E9E |
| 1 | KEY-SQUARE, Pump Drive Sheave | 35B375 |
| 1 | PUMP, Plunger Washing | 46C14 |
| 1 | SUPPORT, Plunger Washing Pump | PA1290 |
| 4 | SCREW-HEX CAP, Pump to Support | 75A9 |
| 1 | PLATE-RETAINER, Pump | 2PA1128 |
| 4 | WASHER-LOCK | 95B3 |
| 4 | NUT-HEX | 50B3 |
| 2 | SCREW-HEX CAP, Pump Support & Tank to Skid | 75A39 |
| 2 | WASHER-LOCK | 95B5 |
| 2 | NUT-HEX | 50B5 |
| 1 | TANK-LUBE OIL | 2006626 |
| 1 | COVER-TANK, Plunger Washing | 2006628 |
| 2 | PLUG-SqHd PIPE, Plunger Washing Tank Drain 1-1/4″ | 64A7 |
| 1 | PLUG-SqHd PIPE 1″ | 64A6 |
| 1 | PLUG-SqHd PIPE 2″ | 64A9 |
| 1 | PIPE-OIL SUCTION, Plunger Washing Tank Strainer | WAJ714 |
| 1 | SCREEN-OIL, Plunger Washing Tank Strainer Pipe | 1WAJ511 |
| 1 | SPRING, Plunger Washing Tank Strainer | 78D17 |
| 1 | CAP-PIPE, Plunger Washing Tank Strainer | 64AD4 |
| 2 | ELBOW-PIPE, Plunger Washing Pump Suction Reducing | 64S2 |
| 4 | NIPPLE-PIPE, Plunger Washing Pump Suction | 63AJ6X44 |
| 60″ | HOSE-OIL, Plunger Washing Pump Suction | R14F |
| 1 | ELBOW-PIPE, Feed | 64C3 |
| 4 | SCREW MACHINE, Tank to Skid (1/2 x 1) | 75H4 |
| 4 | CLAMP-HOSE, Plunger Washing Pump Suction & Discharge | 29B35 |
| 2 | BUSHING-PIPE, Oil Suction Pipe to Tank | 64E14 |
| 1 | MANIFOLD-OIL, Feed | PA1255 |
| 1 | CAP-PIPE, Feed | 64AD4 |
| 2 | CLAMP, Feed Pipe | 98A17 |
| 3 | NUT-TUBE, Feed Pipe Flare | 86A7 |
| 3 | CONNECTOR-TUBE, Feed Pipe | 86A6 |
| 137″ | TUBE, Feed Pipe | 85D6B |
| 1 | NIPPLE-PIPE | 63P21 |
| 2 | NUT-WING, (Cover to Tank) | 50H1 |
| 2 | NIPPLE PIPE (1-1/2″ X 6-1/2″) | 63AJ24X64 |
| 2 | HOSE-COOLANT | 29A305 |
| 4 | CLAMP HOSE | 29B32 |
| 4 | NIPPLE-PIPE (Half) | 63AJ24X30 |
| 2 | ELBOW-PIPE | 64C8 |
| 2 | INSERT | 3FO452 |
| CROSSHEAD PIN BUSHING PULLER (Optional Equipment) | ||
| Qty. | Description | Part No. |
| 1 | ASM PULLER, Incl. Ref. No. 1 thru 5 | FXX1585 |
| 1 | PLATE | FXX1277 |
| 2 | BOLT | FXX1279 |
| 1 | BUSHING | FXX1278 |
| 1 | PLATE (Head) | FXX1276 |
| 1 | NUT, Puller Bolt | 50T161 |
| VALVE SEAT PULLER (Optional Equipment) | ||
| Qty. | Description | Part No. |
| 1 | ASM PULLER, Incl. Ref. No. 1 thru 5 | PJ219A |
| 1 | PULLER | PJ219 |
| 1 | BOLT-PULLER | 7AUX235 |
| 1 | PLATE-PULLER | 13AUX292 |
| 1 | NUT | 50C15 |
| 1 | WASHER-PLAIN | 95A22 |
| 1 | JACK, Hydraulic | 100C2* |
Professional Mud Pump Parts Supplier
Whtsapp: +86 15315008951
Email: info@mudpumpshop.com
www.mudpumpshop.com
